Ferplast Snc

ELETTROPNEUMATIC GUNS

The glue gun TR 50 works with melting glues of high and low viscosities in granulate and stick forms. You adjust the desired temperature between approx. 20 and 200°C; so you always operate at the temperature prescribed for the glue. Heating and thermostat are installed directly behind the nozzle, this makes sure that the glue is dispensed at the optimum temperature. Due to the extremely low weight and the balance within the instrument the work is not tiring and your wristle will not be strained.

Accessories:
The TR 50. will become light as a feather when you fix it by a balancer. A stationary stand on which you may deposit the gun and the foot-switch are helpful when you are gluing small parts. Both hands are free for an even more productive procedure. Various nozzles, foot switches, balancers, stands on which the gun may be deposited and stands for stationary operation complete the program.

Glue tank VSB

Technical Data
Voltage	230 V
Heating Capacity	400 W
Air pressure for glue max.	approx. 90 psi/6 bars
Air consumption max.	100 l / min.
Temperature Control	thermostat
Temperature Control range	approx. 20–200°C
Overheat protection	thermal protector
Heat-up time	3–10 min.
Length of electric cord	ca. 8,5 m
Tank Capacity	250 ml
Max. application of glue per minute	250 ml
Weight	1200 g

Support