Ferplast Snc

ELETTROPNEUMATIC GUNS SPRAY / LCD

The glue gun TR 50 works with melting glues of high and low viscosities in granulate and stick forms. You adjust the desired temperature between approx. 20 and 200°C; so you always operate at the temperature prescribed for the glue. Heating and thermostat are installed directly behind the nozzle, this makes sure that the glue is dispensed at the optimum temperature. Due to the extremely low weight and the balance within the instrument the work is not tiring and your wristle will not be strained.
It's available in the model SPRAY and with LCD screen

Model	TR55LCD	TR 60 LCD SPRAY
Voltage	230 V.	230 V.
Power	400 W	400 W
Air pressure for glue	from 1 to 6 bar	from 1to 6 bar
Spray pressure		from 1 a to 6 bar
Air consumption max.	100L/min	100L/min
Temperature Control range	from 50° to 210°	from 50° to 210°
Heat-up time	3-10 min.	3-10 min.
Weight	Kg. 1,4	Kg. 1,2
Tank capacity	300 ml	250 ml
Max. application of glue for minute	300 ml	250 ml
Features	Display LCD	Display LCD-SPRAY
Min. application of glue for minute		3 g/mq

Support for TR 60 LCD SPRAY

Accessories:
The TR 50. will become light as a feather when you fix it by a balancer. A stationary stand on which you may deposit the gun and the foot-switch are helpful when you are gluing small parts.
Both hands are free for an even more productive procedure. Various nozzles, foot switches, balancers, stands on which the gun may be deposited and stands for stationary operation complete the program.

Glue Tank VSB